A big thank you for choosing AngelCamera One or AngelCamera RTS!
Before you start connecting AngelCamera One or AngelCamera RTS make sure that you have:
a fully activated account with angelcam.com
How to connect AngelCamera One or AngelCamera RTS to your router?
There are 2 convenient methods to establish a connection to your router
The first option (recommended):
PoE switch + 2 Ethernet cables
A PoE switch efficiently supplies both Ethernet and power to the camera, simplifying cabling and cutting costs. With a reach of up to 100 meters, it allows flexibility for large installations.
The second option:
12V DC Power adapter (current output of 1A is enough) + 1 Ethernet cable
Through the power adapter, the camera receives its necessary power supply, and the Ethernet cable provides essential internet connectivity.
How can you physically install the AngelCamera One?
For the physical installation, insert three expansion bolts into the ceiling or wall and fix the camera with three mounting screws.
To position the camera in angles, use the Allen wrench.
Planning to install the camera outdoors? Ensure your connection is rain-protected with the included plastic cover. Remember to utilize the provided rubber wheel to secure the cover tightly and effectively.
How to connect AngelCamera One or AngelCamera RTS to Angelcam?
This part is easy! Take a look at the following video or read through the step-by-step guide that shows the process in detail.
For security reasons, it's crucial to complete the setup within the first 20 minutes after turning the AngelCamera One on. If this time limit is exceeded, you will have to restart the device.
Make sure you are on the same local network as the camera
Step by step guide
Log in to Angelcam's mobile application
Tap on the "My Cameras" section
Hit the "+" sign at the top left
Select "AngelCamera"
Create a username and password for the camera and make sure to write it down
Enter the username and password from Step 5, then detect the stream
Name your camera and select the "Add this camera to the cloud" checkbox
Finally, tap on "Add selected camera to Angelcam"
Success
😇 We are here to help
Just say hello@angelcam.com or check out Angelcam Community to connect with other users sharing their own experiences and insights into various security topics.