Skip to main content

How to send events to Angelcam from IFTTT-compatible devices

Connect IFTTT-compatible sensors and devices to an Angelcam sensor to mark events, start event recording and trigger incidents.

Written by Ondrej Lanc

If your sensor or smart device works with IFTTT, you can use it to send events to an Angelcam sensor. Each event can mark your camera's timeline, start event recording and, when your site is armed, trigger an incident. You can find examples of compatible devices and services in Which devices and services work with Angelcam through IFTTT.

IFTTT is one of three ways to send events to a sensor. The others are e-mail and HTTP(S).

Before you start

What the Angelcam service on IFTTT can do

Actions (IFTTT does something in Angelcam):

  • Receive event from sensor: sends an event to your Angelcam sensor.

  • Start camera recording and Stop camera recording.

  • Start broadcasting and Stop broadcasting.

  • Arm RTS and Disarm RTS (Real-time Security).

Trigger (Angelcam starts something in IFTTT):

  • Incident detected: runs when Angelcam detects an incident, for example to turn on your lights. IFTTT checks for new incidents periodically, so there can be a delay. How often it checks depends on your IFTTT plan.

How to connect your device

Step 1. In MyAngelcam, open the Sensors tab of your location and click your sensor. Under Sensor setup instructions → Sending events via IFTTT, note the Sensor name on IFTTT. It's the sensor name followed by its hash, for example Entrance motion sensor (a1b2c3d4e5).

Step 2. Connect your device to IFTTT. Search for your device's brand and follow its authorization steps. The example below shows the D-Link Motion Sensor; other devices work in a similar way.

D-Link connected in IFTTT

Step 3. Connect IFTTT to your Angelcam account. While signed in to IFTTT, go to ifttt.com/angelcam, click Connect and sign in with your Angelcam account.

Angelcam service page in IFTTT

Step 4. On ifttt.com/angelcam, choose a ready-made applet, for example Send D-Link motion alerts to Angelcam. Or create your own: use your device as If This and Angelcam → Receive event from sensor as Then That.

Ready-made Angelcam applets

Step 5. Turn the applet on. Choose your device and the Angelcam sensor from step 1, then save the applet.

Applet settings

Note: The sensor's name, type, linked camera and arming settings are managed in MyAngelcam, not in IFTTT.

Check that it works

Trigger your device, then open the sensor in MyAngelcam. Received events count and Last event received should update. With Cloud Recording, the event also appears on the camera's timeline in the Angelcam mobile app or the web app.

To connect more devices, repeat steps 2 to 5.

Did this answer your question?