Skip to main content

How to update your AngelCamera firmware

Update AngelCamera One and Two in the mobile app over your local network (recommended) or in MyAngelcam in your browser.

Written by Ondrej Lanc

Angelcam regularly releases firmware updates to keep up with new technology, support new features, and maintain security and performance. Keeping your firmware up to date keeps your camera reliable.

When a new version is available for your camera, MyAngelcam shows a banner on the camera's timeline and in its Settings.

How to update your AngelCamera

You can update the firmware in the Angelcam mobile app or in MyAngelcam in your browser. We recommend the app. It sends the firmware to the camera over your local network, which is more reliable than the internet. Your phone must be on the same Wi-Fi network as the camera.

In the mobile app (recommended)

  1. Connect your phone to the same Wi-Fi network as the camera.

  2. Open the location with the camera and tap the arrow icon Update AngelCamera firmware at the top.

  3. Select the camera under Camera(s) in network. If it isn't listed, tap Find camera manually and enter its local IP address. On iPhone, the app needs the Local Network permission to find the camera.

  4. Sign in with the camera's username and password.

  5. The app shows the current and available version with the changelog. Tap Update, read the warning, and tap Continue.

  6. Wait until you see Firmware update complete. The app downloads the firmware, uploads it to the camera, and waits until the camera is back online. Don't unplug the camera during the update.

In the browser

This works from anywhere, but the firmware travels over the internet, so it is less reliable than the app.

  1. In MyAngelcam, open the camera. If an update is available, you see the banner There is a new firmware version available for your camera on its timeline and in Settings.

  2. Open the banner. The Firmware update dialog shows the current and new version and the changes.

  3. Click Update and keep the window open until the update finishes.

The camera must be online, and you need permission to manage it.

What if the update takes too long?

If the update in the browser seems stuck, the dialog asks you to unplug and replug the camera's power. Keep the window open. It waits up to 15 minutes.

Did this answer your question?