Skip to main content

How to set up Dynamic DNS (DDNS) for your camera

When you need a DDNS hostname, how to set it up in your router or camera, and how to use it in MyAngelcam.

Written by Ondrej Lanc

A Dynamic DNS (DDNS) hostname, such as yardcam.ddns.net, always points to your current public IP address, even when your internet provider changes it. This guide shows when you need one and how to set it up in your router or camera.

Do you need DDNS?

You only need DDNS if you connect a camera with port forwarding and your public IP address changes from time to time. To set up the port, see How to set up port forwarding in your router.

  • Recommended instead: connect your cameras through the Angelcam Connector (AngelBox, AngelCamera or the Angelcam Connector on an Axis camera). It needs no port forwarding, no public IP and no DDNS. See What is the Angelcam Connector and which devices have it? and The best alternatives to port forwarding.

  • DDNS doesn’t help behind CGNAT. If your router’s WAN address starts with 100.64 to 100.127, your internet provider shares one public IP address between many customers. Port forwarding can’t work there, with or without DDNS, so use the Angelcam Connector.

Get a hostname

Create a free hostname with a DDNS provider, for example our partner No-IP. Note the hostname, your username and your password.

Keep the hostname up to date

Something on your network has to tell the DDNS provider whenever your IP address changes. Set this up in one place: your router (recommended, because it covers every camera) or your camera.

In your router

  1. Sign in to your router’s administration page. The address and login are usually on a sticker on the router.

  2. Find the DDNS settings. They’re usually under Advanced, WAN or Network, called DDNS or Dynamic DNS.

  3. Choose your provider (for example No-IP), and enter your username, password and hostname.

  4. Save.

In your camera

Use this if your router has no DDNS settings.

  1. Sign in to the camera’s web administration using its local IP address.

  2. Open the network settings and find DDNS. Its place and name differ between brands and firmware versions.

  3. Turn DDNS on, choose your provider, and enter your hostname, username and password.

  4. Save.

No-IP has guides for Hikvision and Dahua cameras.

Use the hostname in MyAngelcam

When you connect the camera with port forwarding, enter the hostname (for example yardcam.ddns.net) in Enter a network address instead of an IP address.

Did this answer your question?