The Angelcam Connector is a small piece of software that connects a camera or other device to Angelcam. It opens an encrypted connection from your network out to Angelcam, so you don't need to open ports on your router, set up port forwarding or have a public IP address.
Why it's the recommended way to connect
No router setup. No port forwarding and no public or static IP address. It also works behind CGNAT, on mobile internet and on Starlink.
Encrypted. Both the video and the camera's login details travel encrypted.
Nothing exposed. There are no open ports, so your network isn't reachable from the internet.
Keeps working when things change. The device connects out to Angelcam, so it reconnects by itself when you restart the router, change your internet provider or move the device to another site.
Which devices have the Connector
AngelBox
Built in. One AngelBox connects up to 10 cameras of almost any brand on the same network. See How to set up AngelBox.
AngelCamera One, AngelCamera Two and AngelCamera RTS
Built in. AngelCamera Two can also connect your other cameras in Gateway Mode. See AngelCamera — setup and connection guide and What Is Gateway Mode in AngelCamera 2?
Axis cameras and speakers
You install the Angelcam Connector app on the device. See How to make Axis camera Angelcam-powered and How to install a network Axis speaker.
DIY AngelBox (Raspberry Pi, OpenWrt router, Ubiquiti EdgeRouter)
You install the Connector yourself. See How to build your own AngelBox?
Don't have any of these? Your existing cameras can still connect through an AngelBox. See What cameras and devices work with Angelcam?
Where you see your Connector devices
At my.angelcam.com, open the Dashboard and switch to the Angelcam Connector tab. It lists every AngelBox, AngelCamera and other device with the Connector in your account, and whether each one is online.
For developers and manufacturers
The Connector is open source. To build it into your own device, see the Angelcam Connector source code on GitHub or write to hello@angelcam.com.
