Skip to main content

How to troubleshoot issues with adding or viewing cameras on Angelcam

The messages you can see when you add a camera, what each one means, and how to fix it.

Written by Ondrej Lanc

This article lists the messages you can see when you add a camera to Angelcam, what each one means, and how to fix it. Find your message below. If yours isn't here, write to us at hello@angelcam.com and include the exact wording.

Before you start

  • Account plan. You need an active account plan to add cameras. Without one, your dashboard still opens, but Connect a camera is disabled with "Camera limit reached for your plan". You see the same message when you reach your plan's camera limit (10 on Essentials, 25 on Professional, 100 on Business). See Angelcam plans, pricing, and free trial.

  • Permission. If Connect a camera shows "permission denied", you don't have permission to manage that location. Ask the account admin to give it to you.

  • AngelBox capacity. One AngelBox handles up to 10 cameras or 20 Mbps of video in total. That's a hardware limit, separate from your plan's camera limit. For more cameras, add another AngelBox. See What is AngelBox and how many cameras can it support?

Messages when you connect a camera with port forwarding

"Unfortunately, we can't see your video stream"

Angelcam can't reach the camera from the internet. Check the port forwarding rule on your router. Check also that you entered your public IP address or DDNS hostname. If your router's WAN address starts with 100.64 to 100.127, your internet provider uses CGNAT and port forwarding can't work. Use AngelBox or the Angelcam Connector instead.

"It seems your ports are closed"

The port isn't open on your router, or your internet provider blocks it. Check the router rule and the port number, or try a different external port. See How to test a port-forwarded stream.

"Wrong username or password."

The camera rejected the login. Use the camera's own username and password, not your Angelcam login. Special characters such as @ # $ % in the password often cause this, so try a password without them.

"Internal IP address"

You entered a local address such as 192.168.x.x or 10.x.x.x. Enter your public IP address or a DDNS hostname instead. See How to connect a camera using port forwarding.

Note: Port forwarding is the hardest way to connect a camera. If it keeps failing, see The best alternatives to port forwarding.

Messages when AngelBox or the Angelcam Connector looks for cameras

"…we haven't found any cameras in your local network"

AngelBox didn't find a camera on its network. Check that the camera is powered on and on the same network (subnet or VLAN) as AngelBox. Then click Detect again.

"The camera seems to be offline."

AngelBox can't reach the camera. Check its power and cable. If the camera's IP address changed, reserve a fixed IP address for it in your router (DHCP reservation).

"No camera stream found."

AngelBox reached the camera but didn't recognize its video stream. Check that RTSP is turned on in the camera's settings. If the stream plays in VLC, enter its stream path manually. See How to find your RTSP stream address.

"Invalid username or password."

The camera rejected the login. Use the camera's own username and password, and watch out for special characters in the password.

"This camera stream is not supported. We support only H.264 and MJPEG"

The camera sends H.265 or another codec. In the camera's video settings, switch the stream to H.264, and turn off smart codecs such as H.264+ or H.265+.

"Detection failed."

Detection didn't finish. Restart AngelBox and try again. If it fails again, write to us.

For more fixes, see AngelBox troubleshooting.

Messages when you pair AngelBox or AngelCamera

"Your pairing session has expired"

Pairing works for 20 minutes after the device powers on. Unplug the device, plug it back in, and pair it again within 20 minutes.

"…paired with a different user account" or "MAC address … already registered"

The device is already paired with another Angelcam account. This usually happens when it was used in a different account before, for example by a previous owner or in another account of yours. Remove it from that account first, then pair it again. If you can't do that, write to us. For privacy reasons, we can't tell you which account the device is paired with.

If you re-flashed the SD card of a DIY AngelBox, it may show in your account twice. Delete the old entry and pair the box with its AngelBox ID instead of the MAC address. See How to connect a DIY AngelBox using its UUID.

"MAC address has been blacklisted"

Write to us. You can't fix this from your account.

Note: A camera that never finished the QR code step won't appear in your account. Start the pairing again.

The camera was added but doesn't show video

Still stuck? Write to hello@angelcam.com with the exact message you see and how you connect the camera (port forwarding, AngelBox, Connector or AngelCamera).

Did this answer your question?