Skip to main content

My camera suddenly went offline

If your camera shows as offline, follow this checklist to find and fix the problem.

Written by Ondrej Lanc

Basic checks

  • Reboot the camera. This makes sure it isn't stuck.

  • Verify that the camera works. Do any of these:

    • Connect to its local web admin interface.

    • Check its status LEDs.

    • Test the connection with the camera's mobile app.

Cameras connected with port forwarding

First, test whether your camera stream is accessible from outside your network. Follow How to test a port-forwarded stream.

  • The stream works from outside: write to support@angelcam.com and we will investigate the problem.

  • The stream doesn't work: follow the advice below.

Network setup

  • Public IP address or dynamic DNS name. Check that it is still the same. See How to set up Dynamic DNS (DDNS) for your camera.

  • Local IP address. Make sure the camera's local IP address hasn't changed. This can happen after a router reboot or downtime.

    • If it changed, update the port forwarding rule in your router.

    • For a permanent fix, bind the camera's MAC address to a single local IP address.

  • Router settings. Double-check your network and port forwarding configuration.

  • Required ports. Make sure the recommended ports are open in your network. If they are blocked or restricted, the connection to our platform may fail.

Hardware and firmware

  • Cabling. Even a faulty cable can affect connectivity. Check all cables carefully.

  • AngelBox status. If the camera is connected through an AngelBox, check the AngelBox status.

  • Firmware. If the camera recently updated its firmware, make sure it works in H.264 mode.

Permanent solutions

To solve this problem for good, do one of these:

  • Ask your internet provider for a static IP address.

  • Use an AngelBox, which avoids the problem completely.

Want e-mail notifications when your camera goes offline? We offer this for free. See Camera status monitoring.

Did this answer your question?