Skip to main content

How to connect a DIY AngelBox using its UUID

Connect your DIY AngelBox with its UUID, without the QR code step.

Written by Ondrej Lanc

A DIY AngelBox can connect using its UUID, a unique identifier it creates the first time it starts. With the UUID, you don't have to show a QR code to a camera. This helps when the cameras are mounted high up or far away.

Before you start

  • Turn your device into an AngelBox with this step-by-step guide (Raspberry Pi, OpenWrt, EdgeRouter and other ARM devices).

  • Find the UUID in the device's configuration file: /etc/arrow/config-skel.json

Connect the AngelBox

  1. Sign in at my.angelcam.com and go to Connect camera.

  2. Click Connect DIY AngelBox.

  3. Enter the UUID and click Submit.

  4. Angelcam finds the cameras on the AngelBox's network. Select the ones you want and save them.

Connect DIY AngelBox form with the UUID field

Don't know the UUID?

Click Use MAC address under the form and connect the AngelBox by its MAC address instead. You then need to show a QR code to one of the cameras to finish pairing.

Did this answer your question?