Skip to main content

How to change your camera's address

Change the stream address of a camera you already have without adding it again or losing its subscription.

Written by Ondrej Lanc

Change a camera’s address when the way Angelcam reaches it changes: you changed the camera’s password, your public IP address or port changed, you need a different stream path, or you replaced the camera with a new one in the same place. The camera keeps its name, add-ons, recordings and broadcasting link.

Warning: Don’t add the camera again. A camera you add again is a new camera with no add-ons, and it’s easy to order a second subscription for it by mistake. Change the address of the camera you already have instead. To use an existing subscription for a new camera, see How to move a subscription to a new camera.

Before you start

Change the address

  1. Open the camera and choose Settings in the camera menu on the left. In Camera address, click Show camera address.

    Settings in the camera menu, then Show camera address.
  2. Type your Angelcam password and click Submit.

    The address is stored encrypted because it often contains the camera’s username and password, so MyAngelcam asks you to confirm it’s you. You then have 5 minutes to make changes. If you sign in with Google or Apple, you skip this step.

    Confirm your Angelcam password. You then have 5 minutes to edit.
  3. Replace the text in Encrypted camera address with the new address.

    • An H.264 camera needs an rtsp:// address, for example rtsp://username:password@203.0.113.25:554/stream1.

    • An MJPEG camera needs an http:// or https:// address.

    • The camera type can’t be changed, so the new address must be of the same type.

    • If the camera’s password contains special characters such as @, : or #, write them encoded in the address (for example %40 for @).

    The Encrypted camera address field with the camera’s address.
  4. Scroll down and click Save settings.

The camera should show its new picture within a few minutes. If it stays offline, check the address in VLC again, and see How to troubleshoot issues with adding or viewing cameras on Angelcam.

Cameras connected through an AngelBox or the Angelcam Connector

For these cameras, the address holds a code of the AngelBox or Angelcam Connector device instead of an IP address, for example rtsp://username:password@0001-…/stream1. You can change the username, the password or the path after it, but don’t change the device code.

  • The camera got a new IP address on your local network: you don’t need to do anything. The AngelBox or Angelcam Connector finds the camera at its new address by itself.

  • You connected the camera through a different AngelBox or Angelcam Connector: on the camera’s Settings page, choose the new device in the AngelBox field and click Save settings. The list shows the devices in your account that can see this camera.

Did this answer your question?