Skip to main content

How to move a subscription to a new camera

Replaced a camera? Keep its add-ons, recordings and broadcasting link by changing the old camera's address.

Written by Ondrej Lanc

When you replace a camera, you don't need to move anything. Keep the old camera in MyAngelcam and point it at the new one by changing its address. The camera keeps its add-ons, configuration, recordings, broadcasting link and embed codes.

The recommended way: change the address

Don't add the new camera. Open the old camera's Settings and replace its address with the new camera's address. The steps are in How to change your camera's address.

If you already added the new camera

  1. Open the new camera's Settings, click Show camera address, confirm your password and copy the address from Encrypted camera address.

  2. Remove the new camera. See How to remove a camera.

  3. Open the old camera's Settings, click Show camera address, paste the copied address into Encrypted camera address and click Save settings.

The old camera now streams and records the new camera's picture under its existing subscription.

Good to know

  • You can add each camera only once. Make sure the new camera isn't still added in this account or in another account you used before.

  • The new camera must use the same type of stream as the old one: H.264 for H.264, MJPEG for MJPEG. To switch between them, contact our support.

  • You need permission to manage the camera.

Did this answer your question?