Skip to main content

How to set up port forwarding for multiple cameras

Connect more than one camera from the same location and public IP address to Angelcam.

Written by Ondrej Lanc

You may have several cameras behind one public IP address on one internet connection. You can connect all of them to Angelcam.

There are two ways to do it. Depending on what your router and cameras allow, you may be limited to one of them.

Option 1: use different external ports in the router

Leave the RTSP port (or the HTTP port for an MJPEG stream) in all your cameras at the default value, usually 554. In your router’s port forwarding configuration, select a different external port for each camera. We recommend 10554, 11554, 12554 and so on. The configuration looks like this in the router:

Router rules with different external ports forwarded to port 554.

Option 2: change the port in each camera

Change the RTSP port directly in each camera to 10554, 11554, 12554 and so on. Then create a port forwarding rule in your router that forwards port 10554 from the public IP address to port 10554 on the camera’s local IP address. The configuration looks like this:

Router rules with the same external and internal port for each camera.

Note: in both cases, the external port must be unique for each camera. When you search for the camera stream in MyAngelcam, specify the custom port number along with the public IP address.

Notes

  • To add more cameras, continue in the same way.

  • We use higher port numbers to avoid conflicts with other devices in your network.

Did this answer your question?