Skip to main content

How to decrease the number of false alarms and notifications

Learn what causes false alarms and how to reduce them to one a month or fewer.

Written by Ondrej Lanc

In Angelcam, we believe it's crucial that you, or someone you trust, verify all incident notifications as quickly as possible, ideally within a minute, so you can respond fast.

A big advantage of Angelcam is that you can use almost any sensor, alarm panel, panic button, doorbell, or even the built-in PIR sensor or motion analytics of a security camera as the event source. See How to send events to Angelcam.

Some of these devices generate a lot of false alarms. Some generate over 5,000 notifications a month. Such a number of false alarms is still fine for triggering event recording, but it produces useless internet traffic.

Warning: anything that generates more than several false alarms a month will be ignored sooner or later. We believe you should aim for one false alarm a month at most.

That is easier said than done, but we are committed to helping you get there.

To get close to zero false alarms, combine these two things:

  • Arm and disarm the location automatically on a schedule, or manually without effort. Angelcam offers both.

  • Use a device that doesn't generate false alarms or lets you adjust its sensitivity. See our recommendations below.

What causes false alarms and how to fix them

Security camera with built-in video motion detection

Most of these cameras use very simple algorithms. They can't tell the difference between suspicious activity and, for example, rain, snowfall or a pet wandering around.

Solution: we don't recommend using a camera with built-in motion detection as the source of notifications, unless it has advanced technology that can recognise specific objects, typically humans and cars. Use other hardware with a low false alarm ratio. It starts from $25.

Sensors and alarms with no arming and disarming support, or not using that feature

Solution: arm the location only when nobody should be there. On the web, use the Arming block on the dashboard of the location, and set up a Schedule to arm and disarm it automatically. In the mobile app, use the arm button.

The arm button in the Angelcam mobile app

For all the ways to arm and disarm, see What is arming and disarming, and how to use it.

Sensors that generate events too often

Some devices report ongoing suspicious activity every few seconds. This helps to record a complete incident as one continuous video, but it makes no sense to notify you each time.

Solution: Angelcam groups events into incidents. An incident starts with the first event while the location is armed. It ends when no other event comes for a set time, the Incident duration. All events in that time belong to the same incident, so you get one notification instead of many. A longer duration means fewer notifications.

  1. Click your name in the top right corner and choose Incident Settings.

  2. Pick 1, 3 (default), 5, 10 or 30 minutes, or 1 hour.

  3. Click Save.

Incident Settings: choose the Incident duration.

Incident Settings: choose the Incident duration.

Devices with a PIR (passive infrared) sensor

A PIR sensor monitors the ambient heat emitted by all living beings, which is why it is sometimes called "heat vision". When it detects enough movement of these warm objects, or a significant temperature difference between the object and the background, it signals Angelcam. These devices are typically very reliable and produce few false alarms. Still, many of them are easily disturbed by various heat sources and sunlight.

Solution: lower the sensitivity. Use PIR-based sensors only indoors, where the environment is closed. Avoid placing them close to air conditioners, where cold or hot air flows.

Did this answer your question?