Skip to main content

Access your camera's administration page remotely

Use AngelBox to open your camera's administration page from anywhere, as if you were on your local network.

Written by Ondrej Lanc

With AngelBox, you can open your camera's administration page remotely and change its settings, as if you were on your local network.

Step 2: Log in and enter your AngelBox ID (printed on your AngelBox) when prompted.

Entering the AngelBox ID to access the camera remotely

Step 3: Click the Local Address link.

Step 4: Log in to your camera with its credentials.

Camera login page opened remotely
Did this answer your question?