Skip to main content

How to use motion detection on your AngelCamera

Monitor your AngelCamera's surroundings for movement and get alerts the moment motion is detected.

Written by Ondrej Lanc

Motion detection monitors the camera's surroundings for movement and alerts you instantly.

Key benefits

  • Real-time alerts: receive notifications on your phone or by email the moment motion is detected.

  • Event-triggered recording: record footage only when motion occurs to conserve bandwidth and storage.

  • Custom detection zones: select specific areas within the camera's field of view for active monitoring.

  • Adjustable sensitivity: reduce false alarms by tuning detection responsiveness to your environment.

Open the motion detection settings

  1. Go to my.angelcam.com and log in.

  2. Select your camera from the dashboard.

  3. Open the Settings menu.

  4. Go to Motion Detection.

Motion Detection option in the camera settings

Motion detection settings

You have full control over how the camera responds to movement.

Sensitivity: set how easily the camera triggers an alert based on motion intensity.

Sensitivity setting for motion detection

Reset/Resend Delay: set how long the system waits before it re-triggers or sends another alert after motion is detected.

Define the detection zones and adjust the sensitivity as needed. Enable Notifications to receive alerts.

Tips

  • Avoid placing detection zones on areas with frequent movement, such as roads or trees, to minimize false alerts.

  • Change the sensitivity gradually to find the best balance.

Did this answer your question?