To open your router’s administration and networking settings, you need to know your Default Gateway. This guide shows how to find it on Windows and on a Mac.
Windows
Open a Command Prompt. Click the Start menu button, search for
CMDand open it.If you can’t find the Command Prompt in the Start menu, press the Windows key and the R key at the same time. In the Run window, type
CMDand click OK.Type
ipconfigand press Enter. A lot of information appears. Scroll down to the Default Gateway line. The IP address next to it is your router’s address.Open any web browser, enter the Default Gateway IP address in the address bar and press Enter.
Your browser opens the login page of your router. You need the user name and password. You can sometimes find them on the router or in its manual. If you can’t, find the router’s model number (on the box or on the router) and look up the default user name and password on routerpasswords.com.
Mac
Click the Apple icon in the top left corner and choose System Settings.
Click Wi-Fi. If you use a cable, click Network and then your connection. Then click Details… next to your connection.
Select TCP/IP and find Router. The IP address next to it is your router’s address.
Open any web browser, enter the IP address in the address bar and press Enter.
Your browser opens the login page of your router. You need the user name and password. You can sometimes find them on the router or in its manual. If you can’t, find the router’s model number (on the box or on the router) and look up the default user name and password on routerpasswords.com.
Once you are logged in, continue with How to set up port forwarding in your router.





