Port-forwarding

Alternative option for connecting video enabled devices to Angelcam - for professionals only

Peter Ocasek avatar Pavel Kuba avatar
15 articles in this collection
Written by Peter Ocasek and Pavel Kuba
Connecting a device

How to set port-forwarding in your router

Wondering how to open ports for your camera? Take a look at this step-by-step guide to configure port forwarding rules for your router.
Pavel Kuba avatar
Written by Pavel Kuba
Updated over a week ago

How to protect your network when enabling port-forwarding

Having open ports on your router accessible for everybody is not a good idea, so let's limit access to your cameras just for Angelcam
Peter Ocasek avatar
Written by Peter Ocasek
Updated over a week ago

How to connect IP camera using port-forwarding

See how you connect a camera to the Angelcam while using Dynamic DNS hostname, e.g. No-IP.
Peter Ocasek avatar
Written by Peter Ocasek
Updated over a week ago

How to connect an NVR/DVR using port forwarding

Connecting a NVR or DVR through regular port forwarding and getting the stream from all connected channels
Pavel Kuba avatar
Written by Pavel Kuba
Updated over a week ago

How to find your router administration to setup a port-forwarding

You will need to know your Default Gateway in order to access your router's administration & networking settings.
Peter Ocasek avatar
Written by Peter Ocasek
Updated over a week ago

How to find external IP address, RTSP/HTTP stream path or dynamic DDNS hostname - basic guideline

See the tools & ways how to find your local network address to be able to connect your cameras or NVR/DVR to Angelcam successfully.
Peter Ocasek avatar
Written by Peter Ocasek
Updated over a week ago

How to setup Port Forwarding for Multiple Cameras

When you have more than one camera connected from one location and want to connect all of them to Angelcam
Peter Ocasek avatar
Written by Peter Ocasek
Updated over a week ago

Finding RTSP addresses for IP cameras & NVRs/DVRs

Peter Ocasek avatar
Written by Peter Ocasek
Updated over a week ago

How to Find a RTSP Address for an ONVIF Compatible Camera/NVR/DVR

If you don't have Angelcam Ready camera and can't find a video stream path for your device, ONVIF device manager might help
Peter Ocasek avatar
Written by Peter Ocasek
Updated over a week ago